The Three Standard Components Of A Home Alarm Security System

The Three Standard Components Of A Home Alarm Security System

Residential homes are now more than ever being protected by home alarm security systems, which with the advancement in technology throughout the years have been constantly innovated. Not all security systems are alike, but they do remain similar in that they each contain three standard components.

The main reason for installing any type of home alarm system is in order to keep intruders from vandalizing your residential property. However, nowadays the majority of businesses also use some type of security system as well. In fact, those businesses such as banks needing a higher level of security than regular businesses have to go with much more complex systems, which is also required by the companies that insure them.

Regardless of the type of system or how complex a system may be, there are always three standard components to any given alarm system. In the same way, all security systems use an electrical current as their source of power as well, which allows various sensors to be triggered in order that the alarm system may activate automatically.

These three standard components will oftentimes vary in how advanced or complex their inner workings are, but they still serve the same basic functions. In order for a home alarm system to work the control panel, signaling device, and detectors are all connected together. Some of these standard components are connected with each other through the use of such techniques as infrared signals or radio frequencies.

The control panel of a home alarm is the central processing unit. Within this panel, the system can be programmed according to the needs of the residential home. The control panel, which can be reached through the usage of remote keypads, is used as a means to turn the home alarm on, off, and to reset it as well. The control is also used to store the user’s setting through a memory chip.

All home security systems have some type of signaling devices, but it is not unusual for them to have more than one. A signaling devices is the component within a security system that is responsible for making the sound such as bell, chime, whistle, or buzzer when the alarm has been triggered by an intruder.

Typically, these sounds are high pitched and loud enough to cause even the most confident burglar to panic. Nowadays, more and more home alarm security systems are using strobe lights in colors of red, blue, or yellow to accompany these sounds as they rotate around the room. Other available signaling devices are speech dialers and telephone relays.

The last type of standard component of a security system is known as the detector, which is also a type of sensor. Detectors basically have the job of reported to the control panel in the event an intruder is felt moving around the property. There are three common types of detectors used in a home alarm security system.

The most sensitive of these three is the vibration sensors, which can be triggered by the tiniest of vibrations from a window or door. The type of detectors normally mounted within window edges and doors is known as magnetic contact detectors. Infrared detectors are typically used for the detection of motion around a home that is unusual. These detectors also have the ability to detect smoke and temperature changes too.